INTEGREX i-450H ST
Photo） INTEGREX i-450H S shown with optional equipment
Next generation multi-tasking machines
- Thanks to flat design of the front, the INTEGREX i-H series considerably improves peripheral equipment accessibility such as a robot and raw material stocker.
- Wide variety of turning and milling spindle specifications available
- New MAZATROL SmoothAi CNC system
Thanks to balance cutting with the milling spindle and lower turret (simultaneous machining with two tools), productivity can be increased.
Lower turret standard specifications
12 position drum turret for expanded machining
Lower turret with rotary tools < option >
The lower turret is optionally available with rotary tools.
Milling can be performed simultaneously by the upper and lower turrets for improved productivity.
Bar feeders can be used by the INTEGREX i-H series.
A bar feed interface is available for most of the widely used systems. Optional bar feeder scheduling for high-mix, small lot size production and set production is available.
TA (TURN ASSIST)
The TURN ASSIST robot system does not require complicated robot teaching.
Thanks to the setup software, loading of workpieces on the stocker and robot movement are efficiently performed.
Gantry Loader system
Gantry Loader(GL) features a compact design, lowering machine height. Its unique design also reduces loading / unloading time. The part conveyor can be installed on either left or right sides of the machine and can be integrated with multiple machines.
INTEGREX i-200H ST shown
Mazak AUTO FLEX CELL
The robot system can perform high-mix, low-volume production by a floor mounted robot.
Auto jaw changer
Automatically change jaws which are stored in stocker by program command.
Next generation MAZATROL Smooth CNC system
|Specification||Bed Length - 1500U mm|
|Capacity||Maximum Swing||670 mm / 26.38 in|
|Maximum Machining Diameter||670 mm / 26.380 in|
|Maximum Bar Work Capacity||102 mm / 4.0 in|
|Maximum Machining Length||1519 mm / 59.800 in|
|Main Spindle||Chuck Size||12 in|
|Maximum Speed||3300 rpm|
|Second Spindle||Chuck Size||10 in|
|Maximum Speed||4000 rpm|
|Milling Spindle||B-Axis Travel||240°|
|Maximum Speed||12000 rpm|
|Turret (Lower)||Number of Tools||12|
|Feed Axes||Travel (X Axis)||695 mm / 27.36 in|
|Travel (X2 Axis)||220 mm / 8.66 in|
|Travel (Y Axis)||300 mm / 11.81 in|
|Travel (Z Axis)||1585 mm / 62.40 in|
|Travel (Z2 Axis)||1539 mm / 60.59 in|