Product: Integrex

Photo) INTEGREX i-200H S shown with optional equipment

Next generation multi-tasking machines

  • Thanks to flat design of the front, the INTEGREX i-H series considerably improves peripheral equipment accessibility such as a robot and raw material stocker.
  • Wide variety of turning and milling spindle specifications available
  • New MAZATROL SmoothAi CNC system

Lower Turret

Thanks to balance cutting with the milling spindle and lower turret (simultaneous machining with two tools), productivity can be increased.

Lower turret standard specifications

12 position drum turret for expanded machining

Turret type : 12 position drum turret
Number of tools : 12 tools
Tool size : Turning tool □20 mm
: Boring Bar Φ32 mm                   

Lower turret with rotary tools < option >

The lower turret is optionally available with rotary tools.
Milling can be performed simultaneously by the upper and lower turrets for improved productivity.

Number of tools : 12 tools
(Max. 12 rotary tools)
Max. milling spindle speed : 10000 min-1
Milling spindle power(10%ED) : AC 5.5 kW (7.5HP)
Max. torque(10%ED) : 30 N・m    (3.0kgf・m)
Tool size : Drill Φ16 mm
: Tap M16



Bar feeder

Bar feeders can be used by the INTEGREX i-H series.
A bar feed interface is available for most of the widely used systems. Optional bar feeder scheduling for high-mix, small lot size production and set production is available.

INTEGREX i-450H ST shown



The TURN ASSIST robot system does not require complicated robot teaching.
Thanks to the setup software, loading of workpieces on the stocker and robot movement are efficiently performed.

INTEGREX i-450H ST shown


Gantry Loader system

Gantry Loader(GL) features a compact design, lowering machine height.
Its unique design also reduces loading / unloading time.
The part conveyor can be installed on either left or right sides of the machine and can be integrated with multiple machines.



The robot system can perform high-mix, low-volume production by a floor mounted robot.

INTEGREX i-450H ST shown


Next generation MAZATROL Smooth CNC system


Read more

Machine Specifications

Specification Bed Length - 850U mm
Capacity Maximum Swing 600 mm / 23.62 in
Maximum Machining Diameter 600 mm / 23.620 in
Maximum Bar Work Capacity 65 mm / 2.6 in
Maximum Machining Length 850 mm / 33.460 in
Main Spindle Chuck Size 8 in
Maximum Speed 5000 rpm
Second Spindle Chuck Size 8 in
Maximum Speed 5000 rpm
Milling Spindle B-Axis Travel 240°
Magazine Capacity 38
Maximum Speed 12000 rpm
Turret (Lower) Number of Tools 12
Feed Axes Travel (X Axis) 535 mm / 21.06 in
Travel (X2 Axis) 210 mm / 8.27 in
Travel (Y Axis) 210 mm / 8.27 in
Travel (Z Axis) 900 mm / 35.43 in
Travel (Z2 Axis) 900 mm / 35.43 in