INTEGREX i-450H S
Photo） INTEGREX i-450H ST shown with optional equipment
Next generation multi-tasking machines
- Thanks to flat design of the front, the INTEGREX i-H series considerably improves peripheral equipment accessibility such as a robot and raw material stocker.
- Wide variety of turning and milling spindle specifications available
- Next generation MAZATROL SmoothAi CNC system
Wide variety of milling spindle specifications to meet your various requirements
High speed milling spindle is optionally available.
|12000 min-1||20000 min-1|
|24ｋW(32 HP)||24ｋW(32 HP)|
|124 N・ｍ||124 N・ｍ|
Bar feeders can be used by the INTEGREX i-H series.
A bar feed interface is available for most of the widely used systems. Optional bar feeder scheduling for high-mix, small lot size production and set production is available.
TA (TURN ASSIST)
The TURN ASSIST robot system does not require complicated robot teaching.
Thanks to the setup software, loading of workpieces on the stocker and robot movement are efficiently performed.
Mazak AUTO FLEX CELL
The robot system can perform high-mix, low-volume production by a floor mounted robot.
Auto jaw changer
Automatically change jaws which are stored in stocker by program command.
Next generation MAZATROL Smooth CNC system
|Specification||Bed Length - 1000U mm||Bed Length - 1500U mm||Bed Length - 2500U mm|
|Capacity||Maximum Swing||670 mm||670 mm||670 mm|
|Maximum Machining Diameter||670 mm||670 mm||670 mm|
|Maximum Bar Work Capacity||102 mm||102 mm||102 mm|
|Main Spindle||Chuck Size||12 in||12 in||12 in|
|Maximum Speed||3300 rpm||3300 rpm||3300 rpm|
|Motor Output (40 ED Rating)||37 kw / 50 hp||37 kw / 50 hp||37 kw / 50 hp|
|Second Spindle||Chuck Size||10 in||10 in||10 in|
|Maximum Speed||4000 rpm||4000 rpm||4000 rpm|
|Motor Output (40 ED Rating)||26 kw / 35 hp||26 kw / 35 hp||26 kw / 35 hp|
|Milling Spindle||B-Axis Travel||240°||240°||240°|
|Maximum Speed||12000 rpm||12000 rpm||12000 rpm|
|Motor Output (40 ED Rating)||24 kw / 32 hp||24 kw / 32 hp||24 kw / 32 hp|
|Feed Axes||Travel (X Axis)||695 mm||695 mm||695 mm|
|Travel (Y Axis)||300 mm||300 mm||300 mm|
|Travel (Z Axis)||1077 mm||1585 mm||2563 mm|