Optimized large volume production of automotive components Compact, high-speed horizontal machining center UN-600/30H

  • Considerably smaller machine with when compared to other machines with same machining area thanks to the compound X-axis, half of the X-axis stroke is on the machine table, the other half is on the machine column
  • High-speed cutting 
    Feedrate( Xaxes[ X,Uaxes] / Y,Zaxes ) 120 m/min[ 60 m/min] / 60 m/min
    Acceleration ( Xaxes[ X,Uaxes] / Yaxes / Zaxes ) 2.0 G[ 1.0 G] / 1.5 G / 2.0 G
  • The ball screw cooling system and the standard equipment chiller unit which is used to control the temperature of the spindle motor ensure consistent machining accuracy.
  • Prevention of problems caused by the accumulation of machined chips
  • Items requiring frequent access, such as the lubrication and air inlets, are in one central location for convenient maintenance to minimize machine down time
  • Intermittent operation of hydraulic unit with accumulator results in lower electrical power consumption

Machine Specifications

Specification Values
Capacity Pallet Size 400 mm / 15.740 in
Maximum Workpiece Diameter 600 mm / 23.620 in
Maximum Workpiece Height 500 mm / 19.690 in
Spindle Spindle Taper MAS BT-30
Maximum Speed 20000 rpm
Motor Output (10 minute rating) 18 kw / 25.0 hp
Magazine Number of Tools 20
Feed Axes Travel (X Axis) 510 mm / 20.08 in
Travel (Y Axis) 400 mm / 15.75 in
Travel (Z Axis) 380 mm / 14.96 in