QT-COMPACT 200M
QT-COMPACT 300MY shown
Designed to Meet a Wide Range of Production Requirements
- Equipped with high rigidity integral spindle / motor for unsurpassed machining performance.
C-axis indexing in 0.0001° increments plus rotary tools mounted on turret provide exceptional versatility 12 position turret with high speed indexing and minimum tool interference
- High accuracy positioning is ensured by the high rigidity linear roller guides and direct coupled servo motors on all linear axes
- Outstanding ease of operation thanks to ergonomic machine design
![]() |
Thanks to the non-lift rotary indexing, clamping and unclamping can be done at high speed to realize minimum chip-to-chip time. |
![]() 12 drum 24 position turret |
24 position turret is optionally available to meet the machining requirements of a wide variety of workpieces(Requires turret specific tool holders) |
Note: Maximum bar work capacity depends on chuck specifications
Machine Specifications
Specification | Bed Length - 500U mm | Bed Length - 1000U mm | |
---|---|---|---|
Capacity | Maximum Swing | 695 mm | 728 mm |
Maximum Machining Diameter | 340 mm | 340 mm | |
Maximum Bar Work Capacity | 65 mm | 65 mm | |
Maximum Machining Length | 535 mm | 1085 mm | |
Main Spindle | Chuck Size | 8 in | 8 in |
Maximum Speed | 5000 rpm | 5000 rpm | |
Motor Output (30 minute rating) | 15 kw / 20.0 hp | 15 kw / 20.0 hp | |
Turret (Upper) | Number of Tools | 12 | 12 |
Maximum Speed | 4500 rpm | 4500 rpm | |
Motor Output (30 minute rating) | 5 kw / 7.5 hp | 5 kw / 7.5 hp | |
Feed Axes | Travel (X Axis) | 215 mm | 215 mm |
Travel (Z Axis) | 605 mm | 1155 mm |