IVS-300 II shown
Inverted vertical spindle CNC turning center designed for high productivity
The IVS-300 ll & 300M ll are equipped with a high-rigidity, high torque spindle.
The inverted vertical spindle CNC turning center, designed for large lot/mass production applications, realizes unsurpassed productivity with minimum floor space requirements. The X-axis rapid traverse rate realizes reduced non-cutting time. For convenient automatic production, work handling is performed by the headstock motion – standard equipment. A wide variety of work stockers can be utilized with the IVS series, so that an automatic production systemwith unsurpassed productivity can be realized for any production requirement.
|Specification||Bed Length -|
|Capacity||Maximum Swing||350 mm / 13.78 in|
|Maximum Machining Diameter||350 mm / 13.780 in|
|Maximum Machining Length||180 mm / 7.090 in|
|Main Spindle||Chuck Size||10 in|
|Maximum Speed||4000 rpm|
|Motor Output (30 minute rating)||26 kw / 35.0 hp|
|Turret (Upper)||Number of Tools||12|
|Motor Output (10 minute rating)||6 kw / 7.5 hp|
|Feed Axes||Travel (X Axis)||880 mm / 34.63 in|
|Travel (Z Axis)||280 mm / 11.00 in|